Plate Heat Exchanger

Product Details:

We supply and manufacture cross flow exchanger of all sizes and all plate gaps. As per the customers requirement also we have our PHE ranging from 50000 cfm to 25000


Application range : 
1. Residential ventilation system, HVAC energy recovery system. 2. Waste heat/cool recovery place. 3. Clean room.  

Application : 
Used in comfortable air conditioning ventilation system and technical air conditioning ventilation system. Supply air and exhaust air totally separated, heat recovery in winter and cold recovery in Summer

Working principle :
Two neighbor aluminum foils form a channel for fresh or exhaust air stream. Heat is transferred when the air streams flow crossly through the channels, and fresh air and exhaust air is totally separated

Additional Information:

• Production Capacity: 1000
• Delivery Time: Available in stock
• Packaging Details: wooden packing inclusive

Product Details:

Cross-flow heat exchanger The cross-flow heat exchanger is built from aluminum plates. Plates in special version are additionally covered with a layer of epoxy resin, between which supplying and returning air flows (streams are either cross-flow or separated from each other). Discharged air flows through some of ducts between the plates heating them,  while the fresh air flows through remaining ducts, drawing heat from heated plates. Advantages of cross-flow heat exchanger are its simple design, no moving parts and system tightness. Heat exchangers reaches efficiency of 55 to 70%. Additionally, the exchanger can be equipped with a by-pass damper, which allows air to be redirected outside the operational part of the exchanger if there is no need for heat recovery. It also serves as freezing protection for exchangers. The droplet separator is installed on the discharge side of the exchanger, which removes condensation of the airstream.

Additional Information:

• Production Capacity: 100000
• Delivery Time: 1 week
• Packaging Details: wooden case

Product Details:

We supply and manufacture cross flow exchanger of all sizes and all plate gaps. As per the customers requirement also we have our PHE ranging from 50000 cfm to 25000

Additional Information:

• Delivery Time: 1-2 WEEKS

Product Details:

Cross-flow and Counter-flow Plate Exchangers

• In cross-flow exchangers the two air streams are perpendicular to each other. Cross-flow exchangers typically have lower energy recovery effectiveness, but lower pressure drops. They also are typically lower cost.
• In counter-flow exchangers the two air streams are parallel and opposite to each other. Counter-flow exchangers typically have higher performance but are more expensive and have higher pressure drops.

Specification : 
Air to Air Cross Flow PlateHeatExchanger 770* 610*808*9mm
0.1mm hydrophilic aluminum foilplate, 1mm galvinized steel frame,Plate distance: 9mm

Additional Information:

• Production Capacity: 1000
• Delivery Time: Available in stock
• Packaging Details: Wooden packing

Product Details:

Specification : 
Air to Air Cross Flow PlateHeatExchanger 900* 900*600*3.5mm
0.1mm hydrophilic aluminum foilplate, 1.5mm galvinized steel frame,Plate distance: 3.5mm

Additional Information:

• Production Capacity: 1000
• Delivery Time: 1-2 WEEKS
• Packaging Details: Wooden packing included

Product Details:

Cross-flow heat exchanger The cross-flow heat exchanger is built from aluminum plates. Plates in special version are additionally covered with a layer of epoxy resin, between which supplying and returning air flows (streams are either cross-flow or separated from each other). Discharged air flows through some of ducts between the plates heating them,  while the fresh air flows through remaining ducts, drawing heat from heated plates. Advantages of cross-flow heat exchanger are its simple design, no moving parts and system tightness. Heat exchangers reaches efficiency of 55 to 70%. Additionally, the exchanger can be equipped with a by-pass damper, which allows air to be redirected outside the operational part of the exchanger if there is no need for heat recovery. It also serves as freezing protection for exchangers. The droplet separator is installed on the discharge side of the exchanger, which removes condensation of the airstream.

Product Details:

The aluminum foil with high quality hydrophilic coating is used as the heat transfer conductor, which is processed by special process. It is characterized by high heat exchange efficiency, easy maintenance and long service life.
Epoxy aluminum foil, corrosion resistance. suitable for special occasions;A great number of specifications and sizes and plate spacinq (2.5-12mm) to choose: Modular structure, can provide any size of the section and the combination of plate stack thick ness, no moving parts, equipment maintenance costs;Compact structure, small size, suitable for various occasions.

Additional Information:

• Production Capacity: 10000
• Delivery Time: 2 -4 weeks
• Packaging Details: wooden packing

Product Details:

Cross flow heat exchanger core is made of antiseptic hydrophilic/epoxy coating aluminum foil and galvanized sheet cover. The air is forced to crossover through the heat exchanger core, two air streams never come into direct contact, avoid the transfer of any smell and moisture.
It is usually being used for recovering energy at residential, commercial and wind-power industry ventilation systems.




Feature:
*Adopt antiseptic hydrophilic aluminium foil, resistant to corrosion, with long service life.
*Apply to special occasions of epoxy resin aluminum foil, corrosion resistance stronger.
*Many size heat exchanger core (plate distance 2.5-12mm)for your choice.
*Module structure, any sine can be praided, no running components, low maintenance cost.
*Compact structure, small volume, suitable for various occasions.

Production Technology:
1.The surface of heat exchanger core was processed with heat transfer enhancement techniques, increased the 10% heat transfer area.
2.Convex and concave air channel, ensure the strength and tightness of heat exchanger core, could bear high pressure.
3.Cross air channel, double folding process of the face side edges, which is equal to 5 times material thickness, ensure the high intensity and tightness.
4. All joints are air-proofed by air-proof glue, ensured that the heat exchanger core has excellent air tightness.

Model Range: 

Combination: 

Application: The ERA heat exchanger core is the major part of heat recovery ventilator(HRV), for air volumes up to 30,000 m3/h, include the household and commercial ventilation. The heat exchanger core recover the heat energy in winter and cold energy in summer, so as to save the energy and give room for fresh air.

Additional Information:

• Production Capacity: 500
• Delivery Time: Available in stock
• Packaging Details: Wooden packing inclusive

Product Details:

Sensible heat recovery air to air heat exchanger is used in comfortable air conditioning ventilation system and technical air conditioning ventilation system. Supply air and exhaust air totally separated, heat recovery in winter and cold recovery in Summer. Two neighbor aluminum foils form a channel for fresh or exhaust air stream. Heat is transferred when the air streams flow crossly through the channels, and fresh air and exhaust air is totally separated.

  

 

Features of cross flow air to air plate heat exchanger

1. Aluminum foils cross flow sensible heat exchanger

2. Heat recovery efficiency up to 75%

3. 2-side press shaping, double folded edge.

4. Resistance of pressure difference up to 2500Pa

 

5. Under pressure of 700Pa, air leakage less than 0.6% 

Additional Information:

• Production Capacity: 1000
• Delivery Time: 1-2 DAYS
• Packaging Details: Wooden packing included

Product Details:

We supply and manufacture cross flow exchanger of all sizes and all plate gaps. As per the customers requirement also we have our PHE ranging from 50000 cfm to 25000Application range : 1. Residential ventilation system, HVAC energy recovery system. 2. Waste heat/cool recovery place. 3. Clean room.  Application : Used in comfortable air conditioning ventilation system and technical air conditioning ventilation system. Supply air and exhaust air totally separated, heat recovery in winter and cold recovery in SummerWorking principle :Two neighbor aluminum foils form a channel for fresh or exhaust air stream. Heat is transferred when the air streams flow crossly through the channels, and fresh air and exhaust air is totally separated

Additional Information:

• Production Capacity: 1000
• Delivery Time: Available in stock . shipping time extra at actual
• Packaging Details: wooden packing inclusive in offer