Zenco Industries
Zenco Industries
Panvel, Raigad, Maharashtra
GST No. 27AASPZ4933H1ZW
TrustSEAL Verified
Call 0804605973488% Response Rate
SEND EMAIL

Heresite Coating Products

Leading Manufacturer of heresite es 600, heresite anti corrosive coating paint, heresite p-413 anti corrosion coating, finncoat-8403 series baked phenolic coatings, heresite p-413 and uc-5500 series heresite coatings from Raigad.

HERESITE ES 600

HERESITE ES 600
  • HERESITE ES 600
  • HERESITE ES 600
  • HERESITE ES 600
  • HERESITE ES 600
  • HERESITE ES 600
Get Best Quote
Approx. Price: Rs 4,800.00 / LitreGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity19 Litre
Usage/ApplicationIndustrial Use
Packaging Size19ltr
Application MethodNormal spary
Packaging TypeTin can
ColorGray
Shelf Life1 year
Drying Time For Handling4 hour
Finish14 hour
Use Temp.50-75 F
Mixing Ratio Basefilm thickness As per your requirement
BrandHERESITE

ES-600 is formulated as a direct to metal coating. It exhibitsexcellent corrosion resistance, UV resistance and weatheringqualities, along with good adhesion to ferrous and non-ferrousmetals without complex pretreatment or primers. This twocomponentcoating is typically sprayed on internal andexternal surfaces of HVAC-R heat exchangers and relatedequipment.
Request
Callback


Additional Information:

  • Item Code: 8311
  • Production Capacity: 1 ton
  • Delivery Time: 10 days
  • Packaging Details: ES-600 series is available in one gallon and five gallon kits. Both Part A and Part B are provided in short filled cans, allowing for accurate and easy mixing.
Yes! I am Interested

Heresite Anti Corrosive Coating paint

Heresite Anti Corrosive Coating paint
  • Heresite Anti Corrosive Coating paint
  • Heresite Anti Corrosive Coating paint
  • Heresite Anti Corrosive Coating paint
  • Heresite Anti Corrosive Coating paint
  • Heresite Anti Corrosive Coating paint
  • Heresite Anti Corrosive Coating paint
  • Heresite Anti Corrosive Coating paint
  • Heresite Anti Corrosive Coating paint
Get Best Quote
Approx. Price: Rs 3,500 / LitreGet Latest Price

Product Details:

Minimum Order Quantity1 Litre
Service Locationall over india and asia
Industry ServedInfrastructure, Industrial, Marine
ApplicationsPipework, Coastal structures, copper and aluminium hvac coils, Offshore platform components
Anti-Corrosion MaterialsAluminium
TypeEpoxy
Is It Provide AMCProvide Amc
Covered Area Size160-210 sq ft per ltr at @ 30mic dft

We are the leading firm of Heresite Anticorrosive Coating Services. To sustain the quality, our products are made under the guidance of industry certified professionals. In addition, we present this product at nominal prices.

Request
Callback


Additional Information:

  • Delivery Time: Available in stock . shipping time extra
  • Packaging Details: Box packing
Yes! I am Interested

Heresite P-413 Anti Corrosion Coating

Heresite P-413 Anti Corrosion Coating
  • Heresite P-413 Anti Corrosion Coating
  • Heresite P-413 Anti Corrosion Coating
  • Heresite P-413 Anti Corrosion Coating
  • Heresite P-413 Anti Corrosion Coating
  • Heresite P-413 Anti Corrosion Coating
  • Heresite P-413 Anti Corrosion Coating
  • Heresite P-413 Anti Corrosion Coating
  • Heresite P-413 Anti Corrosion Coating
Get Best Quote
Approx. Price: Rs 3,900 / LitreGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1 Litre
TypeEpoxy
Industry ServedMarine, Industrial, Oil & Gas
Anti-Corrosion Materials Aluminium
ApplicationsPipework

A high performance modified phenolic coating developed specifically for heat exchangers. The flexibility and corrosion resistance of Heresite P413appreciably increases the service life of your heat exchange equipment. It is specially suited for coating light gauge metals inequipment operating in severe corrosive environments.
Request
Callback


Additional Information:

  • Item Code: HeresiteP-413
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
  • Port of Dispatch: mumbai
  • Production Capacity: 500
  • Delivery Time: 1week
  • Packaging Details: wooden export packing
Yes! I am Interested

FinnCoat-8403 Series Baked Phenolic Coatings

FinnCoat-8403 Series Baked Phenolic Coatings
  • FinnCoat-8403 Series Baked Phenolic Coatings
  • FinnCoat-8403 Series Baked Phenolic Coatings
  • FinnCoat-8403 Series Baked Phenolic Coatings
  • FinnCoat-8403 Series Baked Phenolic Coatings
  • FinnCoat-8403 Series Baked Phenolic Coatings
  • FinnCoat-8403 Series Baked Phenolic Coatings
  • FinnCoat-8403 Series Baked Phenolic Coatings
  • FinnCoat-8403 Series Baked Phenolic Coatings
Get Best Quote
Approx. Price: Rs 2,200 / LitreGet Latest Price

Product Details:

Minimum Order Quantity1 Litre
Flashpoint TCCFinncoat-8403 17 deg C
Solids by WeightApprox. 38% (finish)
Solids by VolumeApprox. 34% (finish)
Production Capacity1000 Ltr Per Week Pcs

To ensure distribution of orders within undertook period, our organization has an outstanding supply chain system in place. As a trustworthy organization, we store the entire lot in a secured manner in our automated and capacious warehouse. The unit is supervised by our team of experts ensuring complete security.

??

Recommended Usage
  • FinnCoat-8403 is our top of the line baked phenolic formulation for protecting fine tube and coils from the effects of most severe corrosive environments.
  • FINNCOAT-8403 is a tough, extremely durable air dry coating which has a good adhesion, good film building characteristics and excellent flexibility.
  • All are self priming to steel.
  • When thoroughly aged.
  • They produce hard corrosion resistant films.
  • The product is recommended as a heavy duty maintenance coating for immersion exposures to splash, spillage and fumes.
  • FINNCOAT-8403 is a primer/finish combination specially formulated for salt water fumes services. Successful applications include Fans. duct. fume hoods, marine finishes, swimming pools. steel plants, wastewater treatment plants, textile industry, chemical storage areas.
  • Battery storage areas and ventilating systems.
  • The product can be spray or dip applied.

Other Details
ExposureImmersionSplash& Spillage
AcidsExcellentExcellent
SolventsExcellentExcellent
Inorganic SaltsExcellentExcellent
WaterExcellentExcellent
    Request
    Callback
    Yes! I am Interested

    Heresite P-413

    Heresite P-413
    • Heresite P-413
    • Heresite P-413
    • Heresite P-413
    Get Best Quote
    Approx. Price: Rs 3,900 / LitreGet Latest Price
    Product Brochure

    Product Details:

    Minimum Order Quantity1 Litre
    Surface of ApplicationAll types of surface
    ColorBrown
    State/FormAerosol, Liquid
    Shelf Life5yrs
    Thickness (micron)25mic to 59mic
    Model NumberVr514 and p403 and p413
    TechniqueSlurry coating
    Surface FinishingDecreased and cleaned
    Packing TypePlastic and steel cans
    Product TypeAnti corrosive coating paint
    MaterialPhenolic epoxy
    ThinnerHeresite thinner
    Packaging Size (ex. 1L or 1Kg)1, 10, 19, 100,300
    BrandHeresite anticorrosive coating
    Hardness (shore)Standard
    Temperature (deg. Celsius)With stand up-to 200dec c
    Specific GravityStd
    Grade StandardASTM
    Dry Film Thickness~1 mils
    Temperature Cycling4B-5B adhesion after 5 cycles
    Pot lifee: NA
    Performance TestingISO 12944-6 C5 I/M: Passed C5-M high durability and C5-I high durability
    MandrelASTM-D522: >1/4 inch
    Salt Spray: ASTM B-117: 6,000+ hours
    Cross-hatch Adhesion: ASTM D-3359: 5B
    Solids by volume: Approximately 57%
    ImpactASTM D-2794: 160 lb/inch steel; 40 lb/inch aluminum
    Humidity: ASTM D-2247: 2,000+ hours
    Dry Heat Resistance4B-5B adhesion after 5 cycles
    Gloss20-60 on 60 degree meter
    Abrasion Resistance30-40 mg loss per 1,000 cycles
    Shelf life:: 6 months
    Mixing Ratio by Volume:: NA 1 component
    pH Range2.4-12.6
    Cyclic WeatheringISO 20340 Offshore Standard: Passed
    Thermal Conductivity:: At approximately 2 mils thickness, Thermal Conductivity is less than 1.0 w/mK
    SWAAT: ASTM G85-11 Section A.3: Passed 1,000 hours using pressurized coil (see page 2 for results)
    Solids by weight:Approximately 73%
    Heat Transfer Reduction<1% as applied for heat transfer components
    Hardness:: ASTM D3363: 5-6H
    Simulated Sea Water Resistance:: 2,000 hours
    Solvent Resistance: ASTM-D5402: 100 acetone double rubs

    The coil will receive a uniform coating on all surfaces, including fin edges, with P-413, a thermoset, modified phenolic coating. Application of P-413 will be through multiple coats by immersion or flow coating to a film thickness of approximately 1.0 mil. P-413 provides corrosion protection in a 6,000 hour salt spray test in accordance with ASTM B-117 and humidity resistance of >2,000 hours per ASTM D2247. Chemical resistance is demonstrated via 100+ acetone double-rubs per ASTM 5402. P-413 also exhibits superior hardness of 5–6H per ASTM D3363, adhesion of 5B per ASTM B3359 and impact resistance of 160 in/lbs (ASTM D2794). Color shall be brown with gloss of 20–60 — 60 degree. If the coils are to be subjected to direct ultraviolet (UV) exposure, a spray-applied UV-resistant topcoat is an option.
    Request
    Callback
    Yes! I am Interested

    UC-5500 Series Heresite Coatings

    UC-5500 Series Heresite Coatings
    • UC-5500 Series Heresite Coatings
    • UC-5500 Series Heresite Coatings
    • UC-5500 Series Heresite Coatings
    • UC-5500 Series Heresite Coatings
    • UC-5500 Series Heresite Coatings
    • UC-5500 Series Heresite Coatings
    • UC-5500 Series Heresite Coatings
    • UC-5500 Series Heresite Coatings
    • UC-5500 Series Heresite Coatings
    • UC-5500 Series Heresite Coatings
    • UC-5500 Series Heresite Coatings
    Get Best Quote
    Approx. Price: Rs 3,900 / LitreGet Latest Price

    Product Details:

    Minimum Order Quantity1 Litre
    Cyclic WeatheringASTM G 85 Annnex A5: At 2,000 hours no face blistering, no face rusting. 0-2.5 mm scribe creepage.
    Corrosion ResistanceASTM B 117-94: At 1,500 hours No face blistering, no face rusting. 0-2.5 mm scribe creepage.
    Production Capacity1000 Ltr Per Week Pcs
    Exterior ExposureASTM D 1014-83 Miami, FL, 97% gloss retention after 12 months.
    FlexibilityASTM D 522 No cracking or delamination of film after full cure.
    QUVASTM D 4587 1,000 hours, passes
    Pencil HardnessASTM D 3363-74 2B-HB
    Heat ResistanceASTM D 2485 Passes at 250oF (121oC)
    Abrasion ResistanceASTM D 4060: No more than 165 mg loss CS-17 Wheel 1kg load, 1000 cycles
    Adhesion CrosshatchASTM D 3359 5B
    Adhesion ElcometerASTM D 4541 1100+ PSI
    Impact ResistanceASTM 2794 Direct 100 in./lbs., Reverse 30 in./lbs.

    In 1964, Heresite was the first company to apply coatings to aluminum-finned, copper-tubed heat exchangers. The Heresite coating became then, and still remains a standard in the industrial coatings industry. We provide the highest quality protective coatings for air conditioning and refrigeration systems that operate in moderate to severely corrosive environments, including both coastal and/or industrial applications. A high performance polyurethane specially designed to provide superior performance in demanding environments. UC-5500 is formulated as a top coat for other Heresite Coatings. It exhibits outstanding UV resistance with excellent weathering qualities, along with good flexibility and good abrasion resistance. This two component coating is typically sprayed on the exterior surfaces of heat exchangers and related equipment, process equipment, transport vessels, tanks and structural steel.

    Request
    Callback
    Yes! I am Interested

    Heresite P-403 Coating

    Heresite P-403 Coating
    • Heresite P-403 Coating
    • Heresite P-403 Coating
    • Heresite P-403 Coating
    • Heresite P-403 Coating
    • Heresite P-403 Coating
    • Heresite P-403 Coating
    • Heresite P-403 Coating
    Get Best Quote
    Approx. Price: Rs 3,900 / LitreGet Latest Price

    Product Details:

    Minimum Order Quantity1 Litre
    State/FormLiquid
    ColorBrown
    Application Methods of CoatingSpray
    Packaging TypeTin, Plastics Bucket
    Temperature120 Degree F

    P-403L high bake phenolic has been the industry standard for decades for the storage and transport of chemicals in rail cars and ISO/storage tanks. It is the optimum choice for your applications where pH< 9 is likely to be encountered. P-403L offers excellent resistance to solvents, acids and salts, including 70-98% sulfuric acid at temperatures up to 120 Degree F.
    Request
    Callback
    Yes! I am Interested

    P-413 Heresite Coatings

    P-413 Heresite Coatings
    • P-413 Heresite Coatings
    • P-413 Heresite Coatings
    • P-413 Heresite Coatings
    • P-413 Heresite Coatings
    • P-413 Heresite Coatings
    • P-413 Heresite Coatings
    • P-413 Heresite Coatings
    • P-413 Heresite Coatings
    • P-413 Heresite Coatings
    Get Best Quote
    Approx. Price: Rs 4,500 / LitreGet Latest Price

    Product Details:

    Minimum Order Quantity1 Litre
    SWAATASTM G85-11 Section A.3: Passed 1,000 hours using pressurized coil (see page 2 for results)
    Gloss20-60 on 60 degree meter (topcoat dependent)
    Meets Other SpecsHoneywell MC 7200-01 and GE F50T17
    Production Capacity1000 Ltr Per Week Pcs
    Salt SprayASTM B-117: 6,000+ hours
    Simulated Sea Water Resistance2000 hours
    MandrelASTM-D522: Greater than 1/4 inch
    ImpactASTM D-2794: 160 lb/inch steel; 40 lb/inch aluminum
    Dry Film Thickness1 mils
    Abrasion Resistance30-40 mg loss per 1000 cycles
    Meets MIL SpecMIL-C-18467, MIL-E-480 and MIL-STD-883 Method 1101
    Thermal ConductivityAt approximately 2 mils thickness, Thermal Conductivity is less than 1.0 w/mK
    HumidityASTM D-2247: 2,000+ hours
    Solvent ResistanceASTM-D5402: 100 acetone double rubs
    Cross Hatch AdhesionASTM D-3359: 5B
    HardnessASTM-D3363: 5-6H

    In 1964, Heresite was the first company to apply coatings to aluminum-finned, copper-tubed heat exchangers. The Heresite coating became then, and still remains a standard in the industrial coatings industry. We provide the highest quality protective coatings for air conditioning and refrigeration systems that operate in moderate to severely corrosive environments, including both coastal and/or industrial applications. Our phenolic epoxy has an advantage of dense cross linking and can therefore be applied as a very thin film maintaining stable heat transfer.

    Product Details
    • pH range (14 day liquid spot test) 2.4-12.6
    • Temperature cycling (4 hours at -75 DegreeC; 4 hours at 190 DegreeC) 4B-5B adhesion after 5 cycles
    • Dry heat resistance (4 hours at 200 DegreeC; 20 minutes at 232 DegreeC) 4B-5B adhesion after 5 cycles
    • Microchannel Compatible
    • Meets FDA 175.300 for indirect food contact
    • Dielectric Strength [ISO 23762010(e)] 286 volts per mil of thickness.
    Request
    Callback
    Yes! I am Interested
    X

    Product Videos

    Watch More Videos

    Explore More Products

    View All Products




    Reach Us
    Nitin Nalawade (Proprietor)
    Zenco Industries
    Office No. 03, Sector 4, Plot No. 53 A, Rudrakshya, Sector 04, Karanjhade
    Panvel, Raigad - 410206, Maharashtra, India


    Call Us


    Send E-mail