Heat Exchangers

Product Details:

Cross flow heat exchanger core is made of antiseptic hydrophilic/epoxy coating aluminum foil and galvanized sheet cover. The air is forced to crossover through the heat exchanger core, two air streams never come into direct contact, avoid the transfer of any smell and moisture.
It is usually being used for recovering energy at residential, commercial and wind-power industry ventilation systems.

Additional Information:

• Production Capacity: 10000
• Delivery Time: Available in stock
• Packaging Details: : carton or plywood case.

Product Details:

Cross flow air exchange
Epoxy coating aluminium
Temperature environment:-40℃~400℃
Air to air heat exchange
Fin space can be :2.5~12mm
Professional selection and design software 


Cross Flow Heat Exchanger Core
Cross flow heat exchanger core is made of antiseptic hydrophilic/epoxy coating aluminum foil and galvanized sheet cover. The air is forced to crossover through the heat exchanger core, two air streams never come into direct contact, avoid the transfer of any smell and moisture.
It is usually being used for recovering energy at residential, commercial and wind-power industry ventilation systems. 

Additional Information:

• Production Capacity: 10000
• Delivery Time: Available in stock . shipping time extra at actual
• Packaging Details: carton or plywood case.

Product Details:

KEY FEATURES 

• Unit made Aluminium profile & Corner Joints

• Inside sheet made of 0.5mm thickness GI
• Outside sheet made of 0.5mm thickness pre-painted GI
• 25mm thickness Polyurethane foam with 48kg/m3 density
• Fasteners are made of Stainless Steel 304
• 200mm thick ZENCO Rotor
• High heat recovery performances.
• Less space requirements 
• Less self-consumed energy. 
• Low pressure drops.
• Power for rotor drive is negligible. 
• Forward / Backward Curved blowers on Supply & Return Side. 
• Inbuilt Control panel. 
• 25mm Thick G4 Filters on Supply & Return Side. 
• Complete unit mounted on 70/100mm Base Frame made of 1.5-2mm thickness GI 

Wooden Pallet, Corrugated packing, Shrink Wrap shall be provided in packing.


UNIT TECHNICAL SPECIFICATION 
• Model Number: ERV1000
• Supply Air Flow Rate (CFM) 1000
• Supply Air External Static Pressure (Pa) ~100
• Return Air Rate (CFM) 1000
• Return Air External Static Pressure (Pa) ~100
• Rotor Size HRE/700/200/1.7
• Energy Effectiveness >70%
• Controller Electrical Starter panel with Remote Start /stop
• Working Temperature Range -10 to +60°C
• Maximum Unit Power (watts) 1200
• Sound Level ~70DbA
• Phase /Voltage/Hertz 1Ph/220V/50Hz

Additional Information:

• Delivery Time: Available in stock
• Packaging Details: Wooden packing

Product Details:

Highly efficient heat recovery units up to 80% with rotary wheel, forward curved /backward curved blades/direct driven/belt driven.Pre-configured control system for easy start-up. The casing is made of 25 mm, self-supporting Double skinned panels. The outer skinis made from coated steel with a high resistance against corrosion and UV light and the inner skin is made from galvanised steel.Support feet are made from GI. Easy access to all components via large, hinged front doors. Square inlet and discharge connectionflanges.

Additional Information:

• Production Capacity: 1000
• Delivery Time: 3-4 WEEKS
• Packaging Details: Wooden packing

Product Details:

MAIN TECHNICAL PARAMETERS

•• The ventilator is designed for indoor application with the ambienttemperature ranging from-20°C (-4F) to +50°C (+122F) and relative humiditybelow 80%.•• The ventilator is classified as a class I electric appliance.•• Ingress Protection (IP) rating from solid objects and liquids IP22.•• The ventilator design is regularly improved, so some models may slightlydiffer from those ones described in this manual 

Additional Information:

• Production Capacity: 1000
• Delivery Time: Available in stock . shipping time extra at actual
• Packaging Details: Box packing