Anticorrosive Coating Services

Product Details:

It is a two pack water based component latex anti corrosive rust converter - cum epoxy metal primer which serves a protective dark black anti corrosive coating on the rusted metals structures, rusted pipelines, rusted storage tanks, rusted electrical poles, rusted transmission towers, rusted roofing, marines areas application, bridges as well as rusted reinforcement (TMT – Rebar) surface etc.

Product Details:

We are one of the leading suppliers of Anti Fouling Coat and we deliver the best quality of materials to our high esteemed clients and it can be used for water resistant to ships.

Product Details:

General Chemical Resistance This coating offers excellent immersion service resistanceto 92-98% sulfuric acid temperatures to 120 DegreeF. It has alsoshow excellent resistance to solvents, acids, salts and mildlyalkaline solutions. Please consult the Chemical Resistance Guide, Sales Representative or Manufacturer for yourspecific requirements.

Some examples Are

• Sulfuric Acid-Phenol
• Anhydrous Chlorobenzene
• Carbon Tetrachloride

Additional Information:

• Item Code: ZENCO
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
• Port of Dispatch: MUMBAI
• Delivery Time: 6 DAYS
• Packaging Details: WOODEN

Product Details:

This coat is highly recommended for all types of industrial Stainless Steel products and surfaces High performance 3000 plus salt spray resistance Avail in stock Now is 5ltr and can supply 1000 per day.

Product Details:

For the utmost customer satisfaction, we are flexible in delivering the product range at the place agreed by the customers and that too in the set time. We are reckoned for the quality that we offer in our products. And, for maintaining it, we make use of the world-class raw material for manufacturing the products.

Intended Usage

• HERESITE P-403L material is a highly chemical resistant baked phenolic coating designed for use in tank cars, railcars, and storage tanks where chemicals with a pH values less than 9 are likely to be encountered.

Application

• Do not apply if the temperature is less than 5oF(2 DegreeC) above the dew point.
• Adjust the air pressure to approximately 60-75 pounds pot pressure. Adjust spray gun by first opening liquidvalve and then adjust air valve to give approximately an 8-12 inch fan.
• Holding gun perpendicular to the surface at a distance of 12 inches, apply a mist bonding pass.
• Allowto flash off for several minutes, but not' long enough to allowftlm to completely dry.
• Apply 3 to 4 criss-cross multi passes maintaining a wet appearing ftlm.
• Repeat Step #5 until desired ftlm thickness is obtained.
• Allow60 minutes with ventilation prior to introducing heat.
• After the air dry period has elapsed, the temperature should be raised approximately 40 DegreeF (22 DegreeC) in increments of 30 minutes until the desired temperature is reached.

Additional Information:

• Production Capacity: 100000ltr
• Delivery Time: Available in stock . shipping time extra at actual
• Packaging Details: Cane packing

Product Details:

We provide the highest quality protective coatings for air conditioning and refrigeration system that operate in moderate to severely corrosive environments, including both coastal and industrial applications. Heresite VR 514 is a thin film, air dry phenolic coating with excellent resistance to corrosive fume atmospheres and marine/salt air environments.

Product Details:

In 1964, Heresite was the first company to apply coatings to aluminum-finned, copper-tubed heat exchangers. The Heresite coating became then, and still remains a standard in the industrial coatings industry. We provide the highest quality protective coatings for air conditioning and refrigeration systems that operate in moderate to severely corrosive environments, including both coastal and/or industrial applications.

New formulation for an easy application,air-drying phenolic

• Thin film, air-drying phenolics are excellent for resistance to corrosive fume atmospheres, and are particularly good in marine and salt air environments.
• HERESITE VR-514 air-dry phenolic coating is specially formulated to permit application by brush, spray or roller.
• Some of its outstanding properties are excellent durability, good adhesion, good film building characteristics and flexibility.
  When cured, VR-514 will produce a hard, corrosion resistant film, recommended as a heavy-duty coating for exposure to splash, spillage and fumes.
• Successful applications include HVAC equipment, agricultural implements, chemical plants, canning factories, construction equipment, marine finishes, steel plants, sewage disposal plant, textile industry, underground and underwater service and ventilating systems.
• VR-514 is a primer-finish combination material specially formulated for marine/salt water environments.
• When the finished product is going to be exposed to direct UV rays, one topcoat of Heresite UC-5500 or UC-5504 is recommended.

VR-514 Typical Properties

• Dry Heat Withstands 200 DegreeF with excursions to 250 Degree without damage
• Flame Spread Test ASTM E-84 18.4 on a scale of 0-100 (oak wood = 100)
• Adhesion ASTM D-4541 > 750 psi
• Impact Resistance ASTM D - 2794 Direct > 25 in/pound, Indirect 13 in/pound.

Product Details:

FINNCOAT-8500 is our top of the line spray formulation for protecting fin tube and coils from the effects of most severe corrosive environments. FINNCOAT-8500 is a tough. extremely durable air dry coating which has a good adhesion, good film building characteristics and excellent flexibility. All are self priming to steel. When thoroughly aged, they produce hard corrosion resistant films. The product is recommended as a heavy duty maintenance coating for exposures to splash, spillage and fumes. FINNCOAT-8500 is a primerlfinish combination specially formulated for salt water fumes services. FINNCOAT'S unique elongation and flexibility allow the coating to expand and contract at the same rate as the underlying metals, preventing cracking, chipping and flaking of the coating. Being a single component coating it can be easily repaired in the field, should it be damaged from abrasion. A unique feature of this coating is its low surface tension, this property prevents fouling material to deposit on the coils and fins and the deposits tend to slide off. This helps in the decrease of the heat transfer efficiency due to fouling and provides a complete Corrosion protection.

Successful applications include

• Fans,
• duct,
• fume hoods,
• marine finishes.
• swimming pools,
• steel plants.
• wastewater treatment plants.
• textile industry,
• chemical storage areas,
• battery storage areas
• ventilating systems.

Thinning

• The amount of thinner required is dependent upon temperature, ventilation, humidity; spray equipment used and desired film thickness. The coating is supplied with the required thiimers and should not require any additional thinning, however additional thinner may be added upon verification if required for application.

Unique Features Of Finncoat Range

• Complete corrosion resistance
• Single component coating
• Protects over a wide range of chemicals, acids and alkali.
• Excellent elongation and flexibilty
• Minimal Effects on heat transfer effeciency
• Save energy costs
• Withstand high temperatures
• Does not chip, flake or crack
• Prolongs the life of the equipment significantly
• Excellent adhesion properties
• Environmentally safe

Product Details:

Uses and Area Application: 
Protection  of clean metal Surface for storage or shipment Protection of painted Surface from physical damages during storage or shipping 
Paint booths 
Tooling 
Highly polished metal Surface 
Minimum 2- Coats are required 

Features : 
1. Does not leave residual contamination 
2.water -based ,non-flammable 
3. Near zero VOC ,contain no co-solvent 
4. Prevents multimetal Protection 
5.Temporary coating for any outdoor conditions 
6. Fast drying 
7.nice smooth appearance 
8. In different colors 
9. Easy of Application & easy clean 
10. Requires no solvent or paint removers 
11.simple to dispose off ad a solid waste 

Application: Automotive Body and frame steel sheets , small parts.  Transit coating

Glass curtain wall , Aluminum alloy doors and Windows ,Stainless steel parts ,Spray booth and other resistance protection

Additional Information:

• Production Capacity: 1000 ltr
• Delivery Time: Available in stock . shipping time extra
• Packaging Details: Can packing

Product Details:

All types of hvac coils for all air conditioning machines Protection for alu copper fin coils all types of havc dusts and cabins. It has also show excellent resistance to solvents, acids, salts and mildly alkaline and chemical fumes

Product Details:

It is an ideal water-based non-acidic and pollution free ready to use rust remover & rust preventive solution.It can be easily removes the rust, light oil, welding spots & black scale on the metal surface with proper application.It is design for all types of old painted & rusted factory metal structure, pipeline, storage tank etc.

Product Details:

In 1964, Heresite was the first company to apply coatings to aluminum-finned, copper-tubed heat exchangers and radiators. The Heresite coating became then, and still remains a standard in the industrial coatings industry. We provide the highest quality protective coatings for heat exchange systems that operate in moderate to severely corrosive environments, including both coastal and/or industrial applications.

New product for high temperature environments

• Our latest introduction to the Heresite product family-HT-106 is a high temperature coating.
• This is a high performance modified silicon polymer coating developed specifically for complex geometry heat transfer equipment which requires high temperature heat resistance.
• This coating leverages a unique chemistry, designed to protect against degradation due to the combination of high temperature and chemical exposure.

HT-106 Typical Properties

• Maximum Heat Resistance 300 DegreeC (~570 DegreeF) with an aggressive ramp from room temperature to 300 DegreeC in one minute
• Possible applications to 600 DegreeC (~1100 DegreeF) dependent on service conditions, contact Heresite representative for further information
• Adhesion remains consistent at 4B-5B, after 25 cycles of the aggressive ramp from room temperature to 300 DegreeC in one minute and then held at 300 DegreeC for 16 hours
• Cure Schedule 1 hour metal temperature at 200 DegreeC
  Solvent Resistance >30+ double MEK wipes
• Chemical Resistance at Room Temperature Sulfuric acid resistant at 0.5% for approximately 500 hours; Ammonia resistant (concentrated) for approximately 1,500 hours

Product Details:

Suitable for the copper pipes and fitting and all types of industrial copper product to make aesthetic look similar to copper colour Avail stock Also provide the 3000hrs of salt spray resistant against corrosive invornment

Product Details:

Product Details:

Product Details:

We take care of all the raw materials used in the product manufacturing and designing. The inputs (raw material) used are quality certified and are remarkable for the production. Owing to our state-of-the-art warehouse, we efficiently entertain both automated inbound and outbound consignments with utmost proficiency. The products are sorted and segregated to make sure that the delivery commences systematically.

Features

• High grade material
• High strength
• Long life